linear valves

aisi 316l angle seat valve is suitable for air, water, alcohol, oil, petroleum products, saline solutions, steam, etc. (as long as compatible with aisi 316l or ptfe).
pressure from 0 to 16 bar (steam from 180°c, from 0 to 10 bar)
temperature from –10°c to 180°c.
range available from dn 15 to dn 50 in the double acting versions,
spring return n.c. from above and below the plug,

both double acting and spring return vip_valves (either normally
open or normally closed) are available in sizes ranging from 3/8” to 2”.
gas threaded ends as per uni/iso 7/1 rp - din 2999 (npt threads on request) with control fluid connections as per namur interface.
improved fluid dynamics allow minimum pressure losses.
vip_valves can be used in any mounting position (horizontal, vertical or oblique). they can be provided with seals in nbr, fkm or epdm:
-nbr: suitable for air, gas, oils, water etc..
-fkm: perfectly suitable for most fluid. unsuitable for steam.
-epdm: perfectly suitable for hot water and steam. unsuitable for mineral products (oils, grease, etc..).
pressure: 10 bar max.
temperature:
from -20°c to +80°c (nbr);
from -20°c to +150°c (fkm);
from -20°c to +150°c (epdm).
vacuum tightness: 740 mm hg