three_way_control_valve

the v250 control_valves are equipped of three-way body both for mixing service (two inlet ports one outlet port) and diverting service (one inlet port and two outlet ports). the actuator is provided of rubber diaphragm and multi-spring package. its action should be direct (air to close), or reverse (air to open). the v250 valves have been designed to assure an accurate control in any process condition. their wide application ranges allows using the v250 with the most common process fluids such as water, superheated water, steam, thermal oil, air gas and other non corrosive fluids.

the v250 on-off valves are equipped of three-way body for diverting service (one inlet port and two outlet ports). it could be feed directly by air pipe network from 6 to 10 bars. the v250 valves have been designed to assure an accurate control in any process condition. their wide application ranges allows using the v250 with the most common process fluids such as water, superheated water, steam, thermal oil, air gas and other non corrosive fluids.

control valve for food processing, chemical and cosmetic industry. angle_valve with pneumatic_actuator able to setting up pneumatic positioner or electro pneumatic positioner. the valve body is made in stainless steel and special care it taken to avoid dead spots. the clamp type coupling between the valve body and the intermediate body enables a quick dismounting, which is also ideal for cleaning in place (cip method). all valves are equipped with commercial seals even though different typologies of materials are used to better adapt them to the process fluid.

3 way divert valve omc is used to deviate the passage fluid. this valve is use in industrial sector such the food, pharmaceutical, chemical and cosmetic where the high hygienist is one of the essential characteristics. the regulation system is a shutter that can be linear or equal percentage. the seal system can be metallic or with soft insert to give perfect seal.